|
NEW X2 Version
Now Available
The RadarMax X2
antenna has been designed by ourselves to meet the need for a High gain
replacement antenna
to suit RadarBox and SBS Virtual radar systems at a
reasonable price
There are several
types available on the market but none match the specifications of the
Radarmax antenna within the price range.
The NEW X2
version adds even more Gain as well
as improving the overall pattern of the Antenna
Results have been
so good that we GUARANTEE an Improvement in operation
of
ANY Virtual Radar system.
Our Demonstration
system here at Nottingham in the Trent Valley showed
the following improvement:
Standard Antenna as supplied with RadarBox = 12 Tracks
Standard Antennas as supplied with SBS-1e = 11 Tracks
RadarMax antenna =
68 LIVE Tracks on BOTH Systems
These figures
can be verified at any time by visiting us and seeing for yourself
the difference RadarMax makes
We GUARANTEE...
Your Reception area will be Increased....
You will Receive and Track More Aircraft...
Aircraft Tracks will be more consistent and
Reliable... Compared to your standard antenna
Radarmax will
beat ANY antenna currently supplied with ANY Virtual radar system !!!
Guaranteed for ONE YEAR the RadarMax antenna is supplied with Stainless Steel
Mounting Hardware and
is manufactured using High Grade Fibreglass.
PL259 Connection
as standard... N Type or BNC connectors are available to special order
but we have found NO advantage in using these connectors over the Standard
PL259.
We have been unable to measure ANY loss whatsoever during bench or live testing.
If you still
have any doubts about how well RadarMax X2 works please click the link below to
see an un-biased report from one of our customers.
http://www.g0hwc.com/airnav_setup.html
Specifications:
1.03m Long Single section Sealed White High Grade UV Stabilised FibreGlass
Radials (3) 60mm length
350mm long Mounting stub included: Aluminium
2 x Stainless Steel Mounting Bolts to suit
Pole dia 15mm to 44mm
2 x Extruded Aluminium Mounting Plates to suit
15mm to 44mm dia Pole and Stub
3 x Stainless Steel Locking screws
Connector S0239 to suit PL259 as Standard
All
you will need is a suitable Pole on which you fit RadarMax. Coaxial
cable of your choice is then used to connect RadarMax to your
RadarBox or SBS-1 system box
We can
supply Coaxial cable in any length you require with
fitted Plugs if required. |
|
The
AirMax X2 Antenna has been designed by ourselves to
meet the need for an antenna for use with both VHF and UHF
Air Band receivers. AirMax X2 is optimised for 129Mhz
and 310Mhz giving useful gain for Civil and Military
Air Bands.
Most Air Band
enthusiasts use a Discone type antenna
that gives a wide frequency coverage but with little or
no gain on the Air Band frequencies. In fact two Discone
type antennas at the higher end of the market actually
attenuate VHF airband by nearly 9db over a 1/4wave dipole.
Our Demonstration
here at Nottingham.. 1/2 mile from
Trent bridge shows a marked improvement in reception on
both VHF and UHF Airbands. We can now receive VHF
Tower signals from Heathrow, Birmingham and Manchester
airports as well as RAF UHF Transmissions from
RAF Coningsby in Lincolshire... ALL of which were
previously not heard with a Discone antenna !
We
GUARANTEE
the AirMax
X2
antenna will outperform
ANY Discone type antenna on VHF and UHF Airband.
if you find otherwise you can claim a full refund of the
purchase price within 14 days of purchase.
Airmax X2 consists of a
VHF and UHF tuned array
within a Glass Fibre tube. Stainless steel fittings are
supplied with the antenna.
Guaranteed for ONE YEAR the
AirMax X2 antenna is
supplied with Stainless Steel
Mounting Hardware and
is
manufactured using High Grade Fibreglass.
PL259 Connection
as standard... N Type or BNC
connectors are available to special order
but we have found NO advantage in using these connectors
over the Standard
PL259.
We have been unable to measure ANY loss whatsoever
during bench or live testing.
Specifications:
1.03m Long Single section Sealed White High Grade UV
Stabilised FibreGlass
Radials (3) 175mm length
350mm long Mounting stub included: Aluminium
2 x Stainless Steel Mounting Bolts to suit
Pole dia 15mm to 44mm
2 x Extruded Aluminium Mounting Plates to suit
15mm to 44mm dia Pole and Stub
3 x Stainless Steel Locking screws
Connector S0239 to suit PL259 as Standard
All
you will need is a suitable Pole on which you fit AirMax.
Coaxial cable of your choice is then used to connect AirMax
to your Receiver or Scanner.
We can
supply Coaxial cable in any length you require with
fitted Plugs if required.
|
